沈阳龙盛物流设备有限公司(苏州福盛泰物流设备有限公司东北办事处)
您现在的位置:首页>>提升门动态 >> 「沈阳厂房提升门」保温提升门电机安装及调试

    「沈阳厂房提升门」保温提升门电机安装及调试

    作者:沈阳厂房电动升降门   发布时间: 2019/6/27 8:47:50

  •  

     

    「沈阳厂房提升门」保温提升门电机安装及调试


    Installation and Commissioning of Electric Machine for Insulating Hoist Door of Shenyang Workshop
     

     



    在很多工厂当中,电动提升门是十分受欢迎的一种门,采用聚氨酯发泡保温门板,内置加强筋。


    In many factories, electric lifting door is a very popular kind of door, using polyurethane foam insulation door panels, built-in reinforcement.
     

     

    沈阳电动提升门厂家



    具有极好的密封性,保温性,和抗风性能,厂房电动提升门可以采用蓝牙,车牌识别,遥控等控制方式,不同类型的企业,可根据自己的实际要求进行选择。


    With excellent sealing, heat preservation, and wind resistance, the electric lifting door can be controlled by Bluetooth, license plate recognition and remote control. Different types of enterprises can choose according to their actual requirements.


    有些场所,对于提升门的防火性能有一定的要求,那么可以选择岩棉板为门板,或者发泡内加阻燃剂,虽然不能与防火门相媲美,但是也可以一定程度上保障用户的生命财产安全。


    In some places, there are certain requirements for improving the fire performance of the door, so you can choose rock wool board as the door board, or foam with flame retardant, although not comparable to the fire door, but also to a certain extent to protect the safety of users'lives and property.


    「沈阳厂房提升门」保温提升门电机安装及调试


    Installation and Commissioning of Electric Machine for Insulating Hoist Door of Shenyang Workshop


    1、将门扇竖起于洞口中各部位调整至需求尺度,门扇坚持笔直。


    1. Adjust the portal fan to the requirement scale by erecting it in all parts of the entrance, and keep it straight.
     

     

    沈阳厂房提升门  沈阳提升门塔轮安装



    2、将上下门轴开始点焊于洞口预埋件及门扇边梃上,装置时应保证上下门轴在同一垂线上,不然门扇开批发关阻力大易损坏门轴,开始点焊后在保证厂房提升门不会倾覆的情况下,试手动开关门扇,应能灵敏转变无阻滞,再将门轴焊牢。


    2. Start spot welding the upper and lower door shafts on the entrance embedded parts and the side panels of the door fans. When installing the device, the upper and lower door shafts should be guaranteed to be on the same vertical line. Otherwise, the resistance of the wholesale closing of the Daqing stacked door will easily damage the door shafts. After starting spot welding, when the door fans are guaranteed not to overturn, try to manually switch the door fans. The door shafts should be able to change sensitively without blockage, and then weld the door shafts firmly.


    3、将电动开门机装置到位,开门机连杆与门扇联合好。将电插销装置于门扇边梃上,调整至开关门扇后能将门扇锁住为好。


    3. Put the electric door opener in place, and combine the connecting rod of the door opener with the door fan. It is better to adjust the electric pin device on the side panel of the door to lock the door after switching the door fan.


    4、按门型尺度需求,将门扇中缝及附近密封胶条调整好,作到门扇封闭时缝隙能被胶条封严。


    4. According to the requirement of door size, adjust the middle seam of the door and the sealant strip nearby. When the door is closed, the seam can be sealed by the strip.

     

    沈阳保温提升门




    5、电气操控箱装于室内便于维修之处。开门机和电插销装置应契合电气装置规程需求,妥善接好维护地线保证设备及人身安全。


    5. The electric control box is packed in the room for easy maintenance. The door opener and the electrical plug device shall meet the requirements of the electrical device regulations and properly connect the ground wire to ensure the safety of the equipment and the person.


    6、查验各有关有些契合需求之后,接通电源按动操控按钮,重复调整行程开关,作到门扇到位后能中止运转。


    6. After checking the relevant requirements, turn on the power supply and press the control button, and repeatedly adjust the stroke switch, so that the operation can be stopped when the door fan is in place.


    关于「沈阳厂房提升门」的安装及调试,您可联系龙盛门业的客服人员,相关技术问题,我们会为您免费解答。


    About the installation and commissioning of the "Shenyang factory lift door", you can contact the customer service personnel of Longshengmen Industry. We will answer the related technical questions for you free of charge.

     

     

沈阳龙盛物流设备有限公司
(苏州福盛泰物流设备有限公司
东北办事处)
电话:024-31081023
联系人:于经理
网址:www.
版权所有:沈阳龙盛物流设备有限公司
(苏州福盛泰物流设备有限公司东北办事处)
  
电话:024-31081023
联系人:于经理
百度地图 - 网站地图 -